Type |
Application |
Impact energy |
Weight |
D |
Universal unit.
For the majority of your hardness testing requirements. |
11 Nmm |
75 g |
G |
Increased impact energy.
For solid components, e.g. heavy castings and forgings. |
90 Nmm |
250 g |
DL |
Slim front section.
For measurements in confined spaces, at the base of grooves or on recessed surfaces.
Note: The impact device DL can only be used with manual correction for impact direction. |
11 Nmm |
100 g |
E |
Diamond ball indenter.
For measurements especially in the very high hardness range (in excess of 50 HRC / 650 HV): Tool steels with high carbide content inclusions. |
11 Nmm |
80 g |
S |
Ceramics ball indenter.
For measurements in the very high hardness range (always in excess of 50 HRC / 650 HV): Tool steels with high carbide content inclusions. |
11 Nmm |
80 g |
C |
Reduced impact energy. Surface hardened components, coatings, thin walled or impact sensitive components (small measuring indentation). |
3 Nmm |
75 g |
DC |
Short device.
For use in very confined spaces, e.g. in holes, cylinders or for internal measurements on assembled machines. |
11 Nmm |
50 g |
SVP 40 |
Wedge seating tester.
Semi-automatic device for the fast evaluation of the wedging (seating and regularity) of stator windings. |
28 Nmm |
1000 g |